Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

Product Information

If the pair is terminated on a 66 or 110 block, it may be necessary to short the pair together with a pair of insulated pliers.

The IntelliTone Pro 200 LAN Toner features a service ID indicating the presence of service on the line. You can clearly identify a specific cable with in a bundle or connected into a patch panel or switch, plus detect faults such as opens, shorts and reversed pairs.Once the cable is located, the IntelliTone Pro 200 LAN probe provides a Cablemap to assure correct pin-to-pin wiring. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires. IntelliTone is a breakthrough solution – and the only solution – that locates and isolates the most elusive, hidden or bundled voice, data and video cables and wire pairs quickly and reliably – even on active networks.

The probe signals via audio and LED visual indicators to help with noisy environments, whilst the simple thumbwheel aids selection of the desired toning mode. The IntelliTone Pro 200 probe has an RJ45 input port and CableMap feature, allowing it to be plugged directly into a patch panel or wall port. The IntelliTone Pro 200 LAN Probe features a CABLEMAP capability that identifies common cable mis-wires in twisted pair cabling.The same patch cable can then be used to validate the correct cable using the Cablemap feature on the IntelliTone Pro LAN 200 probe. You must comply with your employer’s safety standards and obtain necessary training before using Fluke tools or taking electrical measurements.

This allows the toner to be plugged in either at the wall jack with the included patch cable or, if the wall jack is obstructed but connected, the patch cable can be removed from the PC and plugged directly into the toner. IntelliTone Pro changes that by combining cutting-edge digital and analogue signalling to locate and verify virtually any copper cable, regardless of application or environment.IntelliTone Pro changes that by combining cutting-edge digital and analog signaling to locate and verify virtually any copper cable, regardless of application or environment. SmartTone analogue toning eliminates frustrating guesswork locating individual wire pairs during installations. When the pair under test is not terminated, the copper conductors can be touched together briefly to cause a short.

This solution allows the most elusive, hidden or bundled voice/audio, data and video cables and wire pairs to be located and isolated quickly and reliably, even on active networks. That means it’s equipped with the most powerful cable location and verification technologies for any work environment – even active networks. Locate the cable by touching wire with the tip, either the insulation or by making metallic contact. On the telecom side, there can be a variety of jacks and wiring schemes ranging from a single pair on a 4-position wall jack to 4 pairs connected from the 8 positions modular jack to the terminating block.In the office, the wall plate jack may be 6 or 8-position, with the 6-position jack having 4 or 6 pins. uk, wholly owned by Networks Centre , part of Alcadon Group, is an ecommerce channel dedicated to selling leading brands of networks testing equipment, tools and accessories. In the office, the wall plate jack may be 6 or 8-postion, with the 6-position jack having 4 or 6 pins. Cablemap - The IntelliTone Pro 200 LAN Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling.